UHF Wireless Handheld microphone
Perfect for vocal transmission or recording for both beginners or professionals.This Hotec professional UHF dynamic Wireless Microphone System provides clear vocal sound.
This wireless microphone system works best with any PA, loud speaker, mixer, amplifier or home theater system that has ¼” mic socket. Perfect choice for karaoke party, DJ, wedding host, church, business meetings, public speaking, classroom activities, outdoor or onstage performances.
This H-U26C model is a dual wireless microphone, one portable mini receiver works with two microphones. The UHF technology allows you to use several sets simultaneously.
You will get: H-U26C Handheld microphone x 2 / H-U26C Mini wireless receiver x 1 / Microphone foam x 2 / Microphone anti-rolling protection ring x 2 / USB charging cable x 1
Crystal clear vocal sound
These professional wireless dynamic handheld microphones offer a great frequency response with a cardiod pickup pattern to isolate the primary sound source and minimize background noise, it offers pristine vocal sound.
Plug and Play
Plug the mini receiver into the mic socket of any powered speaker, mixer, amplifier for audio output, power on the mini receiver and microphone, it is ready to go.
Supports multi sets working togethher
This UHF wireless microphone system has 32 frequency points for selection and it allows several units working together without worrying about interference with each other as long as you spend a few minutes to choose a most appropriate frequency before use.
Extra large battery capacity
Battery powered microphone and receiver gives you utmost freedom to walk in the room without the hassle and restriction of cables holding you back. The microphone is powered by 2XAA batteries and the Receiver is powered by extra large capacity 18650 rechargeable battery.
TROUBLE SHOOTING
In case the microphone(s) and receiver are not connected, pair them again following the steps below:
1. Power off the receiver and power on one microphone.
2. Open the battery compartment and find the frequency change button. Hold and press the power button and the frequency change button until the LCD starts to flash.
3. Power on the receiver, wait for a few seconds and power off the microphone.When you power it on again, it is connected with the receiver.
4. Press the frequency change button to select the most appropriate frequency point.